You will need:
1x hammer and 1x flat-head screwdriver

*Allan keys and 1x spanner are supplied in the box*

1. Use your flat-head screwdriver to help pry open the box, then use your hammer to help lift the lid
2. Remove all Accessories from the box
3. Then remove the Flexion Reformer Bed
4. Remove the frame from the box
5. Fit the step, locating bolts and the strap with bolts to the end of the reformer
6. Wipe the tracks thoroughly with a damp wipe BEFORE fitting the Flexion Reformer Bed
7. Place the Bed on the clean tracks
8. Connect the springs
9. Fit the headrest with the locating bar
10. Fit the pulley bar with the 4 bolts, washers and nuts supplied for each pillar with the Allan keys and spanner supplied in the box
11. Fit the straps
12. Reveal the Flexion Pilates Equipment logo
13. Enjoy!

You will need:
1x hammer and 1x flat-head screwdriver

1. Use your flat-head screwdriver to help pry open the box, then use you hammer to help lift the lid
2. Remove all Accessories and the Split Pedal Chair from the box
3. Connect the springs
4. Attach the side poles and adjust height to suit
5. Fit the locating pole to the Chair
6. Attach the resistance bands to the Chair by clipping onto the side
7. Enjoy!